Diese Seite ist eine übersetzte Version der Seite Bh vw-t6 mc und die Übersetzung ist zu 100 % abgeschlossen sowie aktuell.

INSTRUCTION.

The main steps for installing your new mobile phone holder are described below. We start with the installation of the inductive holder itself and then ensure a clean look in your cockpit with our cable routing set.

1. Vehicle adapter

1. Prepare gluing

Clean the adhesive surface with an alcohol wipe and test the adhesive effect using the enclosed TEST adhesive. If it does not hold, clean further, see our Q&A.

2. Remove protective film

Now remove the red protective film from the adhesive on the holder.

3. Mount holder

Position the holder as shown in the illustration and secure it by applying pressure.

2. Cable routing

1. Prepare gluing

Clean the adhesive area with the cleaning cloth, wait one minute before continuing.

2. Cable in position

* Place the cable in the position shown in the illustration and plug it into the USB socket.

3. Prepare gluing

Remove the red protective film from the adhesive tape on the cable guide.

4. Gluing

Install the cable guide at the marked position.

Notes.

Frequently asked questions can be found in my Q&A, for all other questions please contact us by email info@beevention.com.