Diese Seite ist eine übersetzte Version der Seite Bh vw-c2 ml und die Übersetzung ist zu 100 % abgeschlossen sowie aktuell.

INSTRUCTIONS.

The following are the essential steps for installing your new phone holder. We will start with installing the holder itself and then use our cable management kit to give your cockpit a clean look.

1. Mobile phone holder

1. Prepare gluing

Clean the adhesive surface with an alcohol wipe and test the adhesive effect using the enclosed TEST adhesive. If it does not hold, clean further, see our Q&A.

2. Remove protective film

Now remove the red protective film from the adhesive on the holder.

3. Insert cable

Insert the charging cable into the holder as shown in the illustration.

4. Mount holder

Position the holder as shown in the illustration and secure it by applying pressure.

2. Cable routing

1. prepare bonding

Clean the adhesive area with the cleaning cloth, wait one minute before continuing.

2. cable in position

Place the cable in the position shown in the illustration and plug it into the USB socket.

3. prepare bonding

Remove the red protective film from the adhesive tape on the cable guide.

4. gluing

Install the cable guide at the marked position.

Notes

Frequently asked questions can be found in my Q&A, for all other questions please contact us by email info@beevention.com.